Aluminum Alloy Vacuum Diffusion Welding Machine
1. Aluminum Alloy Vacuum Diffusion Welding Machine is highly efficient.
2. Aluminum Alloy Vacuum Diffusion Welding Machine has strong stability.
3. The Aluminum Alloy Vacuum Diffusion Welding Machine is versatile.
- Information
Product introduction of Aluminum Alloy Vacuum Diffusion Welding Machine:
Aluminum Diffusion Welding Machine is a device used for diffusion welding of aluminum alloy materials. Diffusion welding is a commonly used joining method, suitable for joining and repairing aluminum alloy materials. Diffusion welding machine is a phenomenon that utilizes the propagation of substances from high concentration to low concentration, which is the diffusion principle. When welding, our Aluminum alloy vacuum welding machine will apply a special flux on the joint surface to promote atomic diffusion and welding quality. Our Diffusion welding of aluminum alloy is composed of a control system, heating system, pressure system, etc. It has fast welding speed and high welding quality. High temperature refractory alloy diffusion welding furnace, tungsten and molybdenum heaters, an indenter using high-temperature TZM alloy, suitable for heat exchangers, cooling plates, and other industries vacuum diffusion welding.
Product introduction of Aluminum Alloy Vacuum Diffusion Welding Machine:
1. Our Aluminum Diffusion Welding Machine has very efficient performance, fast welding speeds and high production efficiency.
2. The welding quality of our aluminum alloy vacuum welding machine is particularly high and can achieve high-quality welds.
3. Our Diffusion Welding of Aluminum Alloy has uniform and strong welds, high welding strength, and no pores, cracks and other defects in the welded joints.
4. The welding effect of this Aluminum Diffusion Welding Machine is very good, and there is no need to use filler materials during welding.
Product parameters of Aluminum Alloy Vacuum Diffusion Welding Machine:
| Installation form | Vertical |
| Heater distribution mode | Distribution of circumference |
| Heater material | Tungsten/molybdenum alloy |
| Thermal insulation material | Tungsten and molybdenum reflective screen |
| Maximum temperature | 1550℃ |
| Temperature control precision | ±1℃ |
| Temperature homogeneity | ±5℃ |
| Limit vacuum degree | 5×10-4Pa |
| Rate of pressure rise | 0.5Pa/h |
| Maximum pressure | 1T to 1000T optional |
| Indenter displacement accuracy | 0.1mm |
| Fluctuation of pressure | ±0.1MPa |
| Size of average temperature zone | Φ1000mm×1500mm |
| Mode of control | Automatic/Manual |
